產品分類
 
特殊化學品Chemical

閥件及噴槍 Valve & Spray Gun

接頭,管件 Fitting&Tubing

Hardy Instruments 秤重控制器/( Weighing Control/Scale)

晶舟盒/晶圓盒 FOUP,FOSB,Wafer Cassette,Shipper,Trays

管件接頭工具 Tubing Tools

二手Wafer Cassette 晶舟盒

液體過濾器 Mykrolis liquid filter

高純度氣體純化器及氣體過濾器 Gas Purifier & Gas Filter

金屬晶舟 Metal Cassette & FOUP Purge Station

濾殼Housing

半導體、食品、生醫級金屬閥門Metal Valve

分封環 O-ring

氣體純化器PPM Grade Purifier / PPM Level Purifier

NexPore Filter

氣體系統

管理
 
   
  回首頁 / 產品介紹 / 氣體純化器PPM Grade Purifier / PPM Level Purifier
 
產品名稱:纖維吸附式乾燥機 操作原理
產品名稱:纖維吸附式乾燥機 操作原理 | 點閱次數:18 | 加入時間:2021/6/7 上午 10:40:18
圖片簡介:
纖維吸附式乾燥機
操作原理:
本纖維吸附式乾燥機由兩組纖維管組(A、B二區)所構成,藉由A區進行纖維吸水程序(纖維吸附), B區進行纖維排水程序(纖維再生)。當A區纖維吸附飽和後,則切換至B區進行纖維吸水程序(纖維吸附),此時A區則進行纖維排水程序(纖維再生)。,兩者交替切換程序,藉以連續不間斷地產生低露點之乾燥壓縮空氣。
Operating principle:
The Fiber Desiccant Dryer comprises of two fiber columns, one column is in dehumidification, the other is in regeneration. When the one column finishes dehumidification, then is switched to regeneration procedure. The two columns alternate with each other to continuously produce very low dew point dry compressed air, please refer to figure on the left side.
 
© 2007 鼎岳科技股份有限公司 All rights reserved. Designed by Kong Design. 流量統計